saw kerf การใช้

• The saw kerf is usually made this way from the base saw metal.
• At this point, put some eighth-inch shims ( that's generally the size of a table saw kerf ) in the upper kerf before the final cut and hold them in place with small clamps.
• The toe kick board is attached to the cabinet by means of a clip, which is either screwed onto the back side of the kick board, or a barbed plastic clip is inserted into a saw kerf, also made on the back side of the kick board.
• If the saw kerf began closing, it could cause the saw to bind and increase friction; wedges, most often made of convenient bits of wood, could be inserted in order to keep the kerf open and reduce the friction . " Kerf " is an Anglo-Saxon word related to our modern day word'carve '.